Toro Field Pro 6040 - Page 212

RemovingandInstallingtheTractionControlLinkage(continued)
3.Removethefastenerssecuringthetractioncontrolrodtothecontrollever.
4.Removethefastenerssecuringthetractioncontrolrodtothepiston(traction)
pumpandremovetherodfromthemachine.
5.Continuetoremovethetractioncontrollevercomponentsasneeded.
g415050
Figure88
TractionControlRods
1.Tractioncontrolrod,LH2.Tractioncontrolrod,RH
6.Verifythelengthofeachtractioncontrolrodpriortoassembly.Theleftside
tractioncontrolrodshouldmeasure77.1cm(30.36inch)andthespring
shouldbecompressedto11cm(4.35inch).Therightsidetractioncontrol
rodshouldmeasure77.3cm(30.46inch)..
7.Installanypreviouslyremovedtractioncontrollinkagecomponents.
8.Adjustthetractionspeed;refertoAdjustingtheTractionSpeed(page5–41).
Chassis:ServiceandRepairs
Page7–14
FieldPro®6040
22267SLRevA