EasyManuals Logo

Toshiba B-EV4 Series User Manual

Toshiba B-EV4 Series
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
- 8 -
3.3 USB INTERFACE
(1) Standard: Conforming to USB Standard Rev. 2.0
(2) Data Transfer Type: Control transfer, Bulk transfer
(3) Transfer Rate: Full speed (12Mbps)
(4) Receive Buffer Size: 4K bytes
(5) Transfer Control Method: Status with the receive buffer free space information is sent in
response to a read request immediately after [ESC][WB][LF][NUL], as described below. Based on
this status response, the host computer can transmit data to prevent the buffer from becoming full.
Status to be returned immediately after [ESC][WB][LF][NUL] is sent (23 bytes):
SOH 01H
STX 02H
Indicates the header of the status block
3XH Status
3XH
Printer status
*Details are described later
Status type 33H Indicates that the status includes the receive buffer free space
information.
3XH
3XH
3XH
Remaining
count
3XH
Remaining number of labels to be printed
*Details are described later
3xH Length
3XH
Total number of bytes of this status block
3XH
3XH
3XH
3XH
Free space of
receive buffer
3XH
Free space of the receive buffer
“00000” (0K byte) to “99999” (99999K bytes)
However, the maximum value should be the receive buffer capacity.
3XH
3XH
3XH
3XH
Receive buffer
capacity
3XH
Receive buffer capacity
“00000” (0K byte) to “99999” (99999K bytes)
However, the maximum value differs depending on the models.
CR 0DH
LF 0AH
Indicates the footer of the status block.
3.4 NETWORK INTERFACE
(1) Configuration: 100BASE LAN
(2) Protocol: TCP/IP
(3) Network Specification: LPR server function, Socket communication function
(4) Receive Buffer Size: 4K bytes

Table of Contents

Other manuals for Toshiba B-EV4 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba B-EV4 Series and is the answer not in the manual?

Toshiba B-EV4 Series Specifications

General IconGeneral
Print MethodDirect Thermal / Thermal Transfer
Power SupplyAC 100-240V, 50/60 Hz
Operating Temperature5°C to 40°C
Print Resolution203 dpi, 300 dpi
Max Print SpeedUp to 127 mm/sec (5 ips) (203 dpi) / Up to 101.6 mm/sec (4 ips) (300 dpi)
InterfaceUSB, Serial
Optional InterfacesWireless LAN
Weight2.4 kg
BarcodesCode 39, Code 128
2D CodesData Matrix, PDF417, QR Code, Maxi Code
Media Width25.4 mm to 112 mm
Media Thickness0.06 mm to 0.19 mm
Media Roll DiameterMax. 127 mm
Ribbon Width40 mm to 110 mm
Ribbon Length300 m
Operating Humidity25% to 85% non-condensing

Related product manuals