Toshiba B-EV4 Series - Image Buffer Clear Command

- 30 -
6.3.4 IMAGE BUFFER CLEAR COMMAND [ESC] C
Function Clears the image buffer for drawing characters, lines, bar codes, and graphics.
Format [ESC] C [LF] [NUL]
Explanation (1) After changing the label size, the image buffer must be cleared.
(2) The increment/decrement designation (described later) is valid until the Image
Buffer Clear Command is transmitted.
(3) The link field designation (described later) is effective until the Image Buffer Clear
Command is sent.
Examples [ESC] D0508, 0760, 0468 [LF] [NUL]
[ESC] T20C51 [LF] [NUL]
[ESC] C [LF] [NUL]
[ESC] RC000; ABC [LF] [NUL]
[ESC] RC001; DEF [LF] [NUL]
[ESC] XS; I, 0001, 0002C3000 [LF] [NUL]