- 10 -
[Self-test printing]
a. Printing program version & check sum
b. Printing various parameters
Parameter Initial value
Tone adjustment +00
Feed adjustment +0.0 mm
Cut position adjustment +0.0 mm
Backfeed adjustment +0.0 mm
Type of character code PC-850
Font of zero 0 (without slash)
Communication speed 9600 bps
Data length 8 bits
Stop bit length 1 bit
Parity NONE(QM)/EVEN(JA)
Transmission control XON/XOFF+READY/BUSY (DTR)
Forward feed wait ON
Control code AUTO
Feed key function FEED
Euro code B0 H
X-coordinate adjustment 0 mm
Sensor selection Transmissive
Sensor adjustment value Transmissive: 12 Reflective: 3
Print speed 5 ips
Flash ROM 4 MB
SDRAM 8 MB
Internal memory External memory
User memory size
704 KB 0 KB
TTF Area 0 KB 0 KB
Writable characters Area 0 KB 0 KB
Spare Area 0 KB 0 KB
PC save Area 704 MB
(On initial setting,
all area is
allocated for PC
save)
0MB
Information None
Total feed distance 0.0 km
Total print distance 0.0 km
Total cut count 0
IP address 192.168.010.020
SUBNET MASK 000.000.000.000
GATEWAY 255.255.255.000
MAC ADDRESS XX-XX-XX-XX-XX-XX
DHCP Disabled
DHCP Client ID FFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFF
Socket communication Enabled
Socket communication port 08000
To Next Page
Loading...
