Toshiba B-EV4 Series - Forward;Reverse Feed Command

- 141 -
6.3.17 FORWARD/REVERSE FEED COMMAND [ESC] U1, [ESC] U2
Function After printing or feeding the paper, feeds the paper to a manually cut position.
When issuing the next label, feeds the paper back to the first printing position.
Format Forward Feed
[ESC] U1; aaaa [LF] [NUL]
Reverse Feed
[ESC] U2; aaaa [LF] [NUL]
Term aaaa: Feed value by which the paper is fed forward or backward.
0030 to 2000 (in 0.1 mm units)
Notes (1) When the [FEED] key is pressed on the printer, one label is fed, and then fed by
the forward feed value automatically if the Forward Feed Command has already
been transmitted.
(2) The Forward/Reverse Feed Command is protected in memory (even if the power is
turned off).
(3) The Forward/Reverse Feed Command is ignored in strip mode and cut issue
mode.
(4) The forward feed is performed at the speed designated in the Issue Command or
Feed Command.
.