- 38 -
Q: Courier (Medium) 15point 12point
R: Courier (Bold) 18point 12point
S: OCR-A 12point 12point
T: OCR-B 12point 12point
U: Kanji (16×16 dots)
V: Kanji (24×24 dots)
W: Kanji (32×32 dots)
01 (a): Writable character 1 (1×1 dot to 720×720 dots)
to
40 (a): Writable character 40 (1×1 dot to 720×720 dots)
51 (a): 2-byte code set writable character 1 (1×1 dot to 720×720 dots)
to
55 (a): 2-byte code set writable character 5 (1×1 dot to 720×720 dots)
a: Drive
(Omissible. If omitted, flash ROM on the CPU board is selected.)
0: Flash ROM on the CPU board
1, 2: SD card (Option)
* Fonts A to L are proportional fonts.
ghh: Fine adjustment of character-to-character space
(Omissible. If omitted, space is adjusted according to the designated font.)
g: Designates whether to increase or decrease the character-to-character
space.
+: Increase
-: Decrease
hh: No. of space dots between characters
00 to 99 (in dots)
ii: Rotational angles of a character and character string
00: 0° (char.) 0° (char.-string)
11: 90° (char.) 90° (char.-string)
22: 180° (char.) 180° (char.-string)
33: 270° (char.) 270° (char.-string)
01: 0° (char.) 90° (char.-string)
12: 90° (char.) 180° (char.-string)
23: 180° (char.) 270° (char.-string)
30: 270° (char.) 0° (char.-string)
j: Character attribution
B: Black character
W (aabb): Reverse character
aa: No. of dots from the character string to the end of the black
background in the horizontal direction
bb: No. of dots from the character string to the end of the black
background in the vertical direction
aa: 01 to 99 (in units of dots)
bb: 01 to 99 (in units of dots)
F (aabb): Boxed character
aa: No. of dots from the character string area to the box in the
horizontal direction
bb: No. of dots from the character string area to the box in the vertical
direction
aa: 01 to 99 (in units of dots)
bb: 01 to 99 (in units of dots)
To Next Page
Loading...
