Toshiba B-EV4 Series - Page 141

- 137 -
[C: Batch (Cut)]
“With automatic forward feed standby” selected in the system mode.
[D: Strip]
[F: Partial cut mode]
(2) End of feed (Completes feeding to the top of form)
Head positionCut position
(1) Place paper.
(3) Feeds to the cut position.
(4) Cuts unnecessary paper.
(5) Feeds back to the home position.
(6) 16.3-mm automatic forward feed after 3 second
(Reserved for future)
Head positionStrip position
(1) Place paper.
(2) Feeds back to the home position.
* If a label is not removed, a feed is performed.
(3) Feeding starts
(4) End of feed
(Completes feeding to the top of form and stops)
(2) End of feed (Completes feeding to the top of form)
Head positionCut position
(1) Place paper.
(3) Feeds to the cut position.
(4) Cuts and unnecessary paper is cut off manually.
(5) Idling.