- 144 -
(7) When “00” (0 KB) is specified for the TrueType font storage area, the bit map
writable character storage area, or the spare storage area, the storage area is not
allocated.
(8) When “11” (704 KB) is specified for any of the TrueType font storage area, the bit
map writable character storage area, and the spare storage area, all storage areas
are used. Therefore, other storage areas cannot be allocated. For example, if
“192” is specified for the TrueType Font storage area, all storage areas are used
for the TrueType Font storage area. The bit map writable character storage area,
the BASIC file storage area, and the PC save area cannot be allocated.
Refer to • Bit Map Writable Character Command ([ESC] XD)
• Save Start Command ([ESC] XO)
• Flash Memory Format Command ([ESC] J1)
• 2-byte Writable Character Code Range Command ([ESC] XE)
Example The TrueType font storage area, bit map writable character storage area, and spare
storage area are set to 64 KB, respectively.
(PC save area: 704 KB – 64KB – 64 KB – 64 KB = 512 KB)
[ESC] XF; 01, 01, 01, E0 [LF] [NUL]
To Next Page
Loading...
