Toshiba B-EV4 Series - Control Code Selection; Automatic Selection

- 182 -
3) When the 2
nd
black mark is detected, the printer further performs a reverse
feed for the distance equivalent to “35 mm minus the distance between the
print head position and the black mark sensor” so that the top edge of the
media is positioned at the print head position.
(If the 2
nd
black mark is not detected even though the printer has performed a
35-mm or more reverse feed, a paper jam occurs.)
<#3> When the printer does not receive any data within 1 sec. after the last issue and
the power is turned off and back to on without opening/closing the top cover.
1) After cutting the media, the printer performs a reverse feed so that the top
edge of the media is positioned at the print head position.
2) When the printer does not receive next data within 1 sec. and the power is
turned off without opening/closing the top cover, a reverse feed will not be
performed as the media is already positioned at the print head position.
Cut position
Print head position
1
2
Feed direction
Cut position
Print head position
1
2
Feed direction