- 252 -
c How to send control code data
SOH (01H) → >A (3EH, 41H)
STX (02H) → >B (3EH, 42H)
to
GS (1DH) → >] (3EH, 5DH)
RS (1EH) → >^ (3EH, 5EH)
US (1FH) → >_ (3EH, 5FH)
d How to send a special code
> (3EH) → >0 (3EH, 30H)
e How to send a Kanji code
Shift JIS
JIS hexadecimal
(For details, refer to the section for the Bar Code Data Command.)
NOTE: “NUL” code in the table cannot be used, however, it can be designated.
If it is designated, data following “NUL” code is not printed.
To Next Page
Loading...
