Toshiba e-STUDIO556 - Page 105

3
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
OUTLINE OF THE MACHINE
3 - 63
[ 3 ] Driving
The drive of each motor in the paper feeding area activates the paper transfer roller as follows.
Feeding motor
(
M20
)
Timing belt
Gear, Pulley
Transport motor
(
M17
)
Timing belt
Pulley
Intermediate transport roller
Registration motor
(
M16
)
Timing belt
Pulley
Registration roller
Tray-up motor-1
(
M21
)
Tray in the first and second drawer
Tray-up motor-2
(
M22
) (
* For JPC model
)
Tray in the third and fourth drawer
Tandem LCF Tray-up motor
(
M41
) (
* Except for JPC model
)
Tray of the Tandem LCF
Tandem LCF end fence motor
(
M42
) (
* Except for JPC model
)
Gear, Timing belt End fence
Gear
Gear Drawer transport clutch
(
CLT5, 7, 9, 11
)
[
Feeding area of the drawer or tandem LCF
]
Drawer feed clutch
(
CLT6, 8, 10, 12
)
[
Bypass feeding area
]
Drawer pickup roller
Drawer feed roller
Drawer separation roller
Bypass feed clutch
(
CLT4
)
Bypass pickup roller
Bypass Transport roller
Bypass separation roller
Transport roller