8
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
8 - 243
8.4.22 Blotched image
Fig. 8-22
Defective area Step Check items Prescription
Paper 1 Is the paper type corresponding to its
mode?
Check the paper type and mode.
2 Is the paper too dry? Change the paper.
Transfer belt unit 3 Is the surface of the transfer belt
supply roller dirty with toner?
Clean it with alcohol.
4 Does the transfer belt exceed its
normal life span?
Replace the transfer belt.
High-voltage transformer
(Transfer charger)
5 Is the output from the high-voltage
transformer normal?
Adjust the output. Replace the
transformer if necessary.
Feeding direction