e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
5 - 18
5.9.2 Operating Procedure
(1) Turn ON the power while [3] button and [C] button are pressed simultaneously.
• The following screen is displayed.
Fig. 5-6
(2) Select the item with the digital keys and press the [START] button.
Firmware Assist Mode
Select number(1-8) and press START key
1. Clear Error Flag in Software Installation
2. Format Root Partition
3. Format HDD
4. Clear SRAM
5. Key Backup Restore
6. Erase HDD Securely
7. Erase SRAM Securely
8. Clear Service Tech Password
To Next Page
Loading...
