Toshiba e-STUDIO556 - Harness Guide

4
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4 - 161
4.12.55 Harness guide
(3) Disconnect 1 connector. Take off the harness
clamp. Remove 4 screws and take off the
RADF board bracket.
Fig. 4-459
(1) Take off the RADF rear cover.
( P.4-117 "4.12.3 RADF rear cover")
(2) Remove the harnesses from the harness
guide.
(3) Remove 3 screws and take off the harness
guide.
Fig. 4-460