Toshiba e-STUDIO556 - Transfer Belt

e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 86
4.9.2 Transfer belt
Notes:
1. Change the screw position before
performing the transfer belt deviation
adjustment.
For the adjustment procedure, refer to
( P.6-59 "6.12 Transfer Belt Deviation
Adjustment").
2. When installing the transfer unit, make
sure that the lever comes under the cam.
Fig. 4-243
Fig. 4-244
(1) Take off the transfer unit.
( P.4-85 "4.9.1 Transfer unit")
(2) Turn the transfer belt unit 90º and pull it out
upward.
Fig. 4-245
Screw
For adjustment
Default
Lever
Cam
Transfer belt unit
Transfer unit