Toshiba e-STUDIO556 - Cleaning Blade

4
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4 - 63
4.7.3 Cleaning blade
4.7.4 Recovery blade
(1) Take off the drum.
( P.4-61 "4.7.2 Drum thermistor (THM5)
and Drum")
(2) Remove 4 screws to take off the cleaner top
cover.
Fig. 4-177
(3) Remove 1 screw to take off the cleaning
blade by holding both sides of the plate.
Note:
Do not touch the edge of the cleaning blade.
Fig. 4-178
(1) Take off the cleaning blade.
( P.4-63 "4.7.3 Cleaning blade")
(2) Separate the recovery blade gently.
Fig. 4-179
Cleaner top cover
Screw
Screw
Cleaning blade
Screw
Recovery blade