Toshiba e-STUDIO556 - Feed Roller

4
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4 - 127
4.12.14 Feed roller
(1) Take off the paper feeder unit.
( P.4-125 "4.12.12 Paper feeder unit")
(2) Remove 1 clip. Then slide the pulley and
remove 1 pin.
Fig. 4-359
(3) Pull out the shaft and take off the feed roller.
Fig. 4-360
Note:
Make sure you assemble the pickup roller
with the one-way clutch in the correct
direction.
Fig. 4-361
Lock
Lock