Toshiba e-STUDIO556 - Original Reading Start Sensor (Prism)

4
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4 - 159
4.12.52 Original reading start sensor (prism)
(3) Release 2 latches and take off the original
reading start sensor.
Note:
When replacing the original reading start
sensor, be sure to perform the original
reading start sensor adjustment.
( P.6-80 "6.14.8 Original reading start
sensor adjustment")
Fig. 4-453
(1) Take off the reading start guide unit.
( P.4-122 "4.12.10 Reading start guide
unit")
(2) Remove 4 screws and take off the stay.
Fig. 4-454
(3) Remove 2 screws and take off the original
reading start sensor prism unit.
Note:
When replacing the original reading start
sensor, be sure to perform the original
reading start sensor adjustment.
( P.6-80 "6.14.8 Original reading start
sensor adjustment")
Fig. 4-455