EasyManua.ls Logo

Toshiba e-STUDIO556 - Page 118

Toshiba e-STUDIO556
1094 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 76
(3) Toner recycling unit
A toner recycling system is adopted in this equipment. The toner, which has been recovered from
the drum surface by the drum cleaner, is transported to the developer unit by the toner recycling
unit, and thus the transported toner is recycled.
This unit consists of the recycle toner hopper to collect and mix the recycle toner, and the pipe to
transport the recycle toner from the drum cleaner to the recycle toner hopper.
Fig. 3-46
Recycle toner hopper
This hopper includes the paddle and auger driven by the hopper motor (M7).
•Pipe
The auger is equipped in the pipe to transport the toner. This auger is driven by the recycle
toner transport motor (M8).
Developer unit
Drum cleaner
Pipe
Recycle toner
transport motor
Recycle toner
hopper
Hopper motor
Recycle
toner

Table of Contents

Other manuals for Toshiba e-STUDIO556

Related product manuals