3
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
OUTLINE OF THE MACHINE
3 - 101
The following are 3 output channels for the cover switch line.
1. +5.1 V
+5VD: CN403 Pin 5
Output to the PLG board
2. +24 V
+24VD1: CN402 Pins 2 and 3
Output to the LGC board, external LCF (via LGC board)
+24VD2: CN402 Pin 1
Output to the LGC board
+24VD2: CN403 Pin 1
Output to the PLG board
+24VD2: CN404 Pin 3
Output to the SLG board
+24VD3: CN409 Pins 3 and 4
Output to the finisher
+24VD4 CN404 Pins 5 and 7
Output to the RADF
3. +36 V
+36VD: CN402 Pins 7 and 8
Output to the LGC board
+36VD: CN403 Pin 3
Output to the PLG board
+36VD: CN404 Pin 1
Output to the SLG board
Output voltage by the type of connector
main power switch line
Cover switch line
Connector Destination Voltage
CN405 For the SYS board, FAX unit (via SYS board) +5VA, +5VB, +5VS, +12VA, +12VB
CN406 For the LGC board, external LCF (via LGC board),
finisher (via LGC board)
+3.3VB, +5VB, +12VB
CN407 For the PLG board +3.3VB, +5VB, +12VB
CN408 For the SLG board +3.3VB, +5VB, +12VB
CN409 For the finisher +5VB
Connector Destination Voltage
CN402 For the LGC board, external LCF (via LGC board) +24VD1, +24VD2, +36VD
CN403 For the PLG board +5VD, +24VD2, +36VD
CN404 For the SLG board, RADF +24VD2, +24VD4, +36VD
CN409 For the finisher +24VD3
To Next Page
Loading...
