Toshiba e-STUDIO556 - Page 201

4
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4 - 55
(6) Take off 2 fingers and then the rear terminal
cover.
Fig. 4-155
(7) Pull up the terminal, remove the spring and
release the hook on the rear side to take off
the charger wire.
Fig. 4-156
(8) Remove 1 screw and take off the cleaning
pad.
Fig. 4-157
Latch
Terminal cover
Charger wire
Spring
Terminal
Cleaning pad
Screw