4
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4 - 105
(8) Remove 2 screws and disconnect 1
connector.
(9) Remove 1 C-ring (rear).
Fig. 4-293
(10) Remove 1 E-ring and take off the gear and
one-way clutch.
(11) Remove 2 screws and take off the bearing
(rear).
Fig. 4-294
(12) Remove 1 C-ring (front).
Fig. 4-295
Connector
Screw
Screw
C-ring
(
rear
)
Bearing
(
rear
)
Gear, One-way clutch
E-ring
Screw
Screw
C-ring
(
front
)
To Next Page
Loading...
