2
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
2 - 3
Power requirements AC 110 V / 16 A (50/60 Hz)
AC 115 V / 16 A (50/60 Hz)
AC 127 V / 16 A (50/60 Hz)
AC 220 V / 9 A (50/60 Hz)
AC 220-240 V / 9 A (50/60 Hz)
* The acceptable value of each voltage is ±10%.
Power consumption 2.0 kW or less
* 1.5 kW or less: TWD version of e-STUDIO656.
* The electric power is supplied to the Finisher, Inserter, Hole punch
unit and LCF through the equipment
Dimensions of the equipment W 698 x D 789 x H 1176 (mm)
Weight Approx. 203 kg (447 lb.) (equipment only)
To Next Page
Loading...
