2
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
2 - 5
[ 3 ] Copy speed (Copies/min.)
The measuring conditions of the copy speed are as follows.
• Continuous copying by placing a single-sided original on the original glass.
• “-” indicates “Not acceptable”.
• The LCF (optional) is available only for A4 and LT.
• The Tandem LCF is available only for A4 and LT.
[ 3-1 ] Plain paper
• Plain paper: 64 g/m
2
to 80 g/m
2
/ 17 lb. Bond to 21.3 lb. Bond
* Accuracy: Within ±2 sheets (Bypass feed) / Within ±1 sheet (Other paper sources)
* Values may vary depending on its use condition and environment.
* When the RADF is used, each copy speed per minute of e-STUDIO556/656/756/856 has reached
55/65/75/85 sheets. These copy speeds can be realized only in the following conditions.
• Original: A4/LT / 1 sheet
• Copy mode: A4/LT / Plain paper / Automatic Paper Selection - OFF / Automatic Copy Density -
OFF
• Number of copy set: 55 or more / 65 or more / 75 or more / 85 or more
• Reproduction ratio: 100%
e-STUDIO556
Paper supply
Paper size
Drawer
Bypass feed
Option LCF Tandem LCF
Size specified
Size not
specified
A4, LT, B5 Top side
discharging
55 45 28 55 55
Back side
discharging
55 45 28 55 55
A5-R, ST-R Top side
discharging
55 45 28 - -
Back side
discharging
55 45 28 - -
A4-R, B5-R, LT-
R
Top side
discharging
44 37 28 - -
Back side
discharging
44 37 28 - -
B4, LG, FOLIO,
COMPUTER
Top side
discharging
38 32 28 - -
Back side
discharging
38 32 28 - -
A3, LD Top side
discharging
34 28 28 - -
Back side
discharging
32 28 28 - -
To Next Page
Loading...
