Toshiba e-STUDIO556 - Page 552

e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 44
[E250] Option LCF transport jam (paper not reaching Option LCF transport sensor)
[E370] 3rd drawer transport jam (paper not reaching 3rd drawer / Tandem LCF transport sensor)
Replace parts Remarks
2nd drawer transport sensor
2nd drawer transport clutch
LGC board
2nd drawer transport roller
Classification Error item
Paper transport jam Paper not reaching option LCF transport sensor
Check item Measures
Option LCF transport sensor • Sensor check (Perform the input check: 03-[FAX]OFF/[5]/[D])
• Connector check
• Harness check.
1st drawer transport clutch (CLT5) • Clutch check (Perform the output check: 03-272)
• Connector check
• Harness check.
LCF board • Connector check
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Option LCF transport sensor
Option LCF transport clutch
LCF board
Rollers
Classification Error item
Paper transport jam Paper not reaching 3rd drawer / Tandem LCF transport sensor
Check item Measures
3rd drawer transport sensor (S45) • Sensor check (Perform the input check: 03-[FAX]OFF/[3]/[C])
• Connector check
• Harness check.
3rd drawer transport clutch (CLT9) • Clutch check (Perform the output check: 03-210)
• Connector check
• Harness check.
LGC board • Connector check (CN328)
• Board check.
Drive unit, Rollers • Gear check
• Roller check