e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 46
[E260] Option LCF transport jam (paper not reaching registration sensor)
[E320] 3rd drawer transport jam (paper not reaching 2nd drawer transport sensor)
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Tandem LCF transport sensor
Tandem LCF transport clutch
LGC board
Rollers
Classification Error item
Paper transport jam Paper which has passed the 1st drawer transport sensor does not reach
the registration sensor during the feeding at the Option LCF.
Check item Measures
Registration sensor (S18) • Sensor check (Perform the input check: 03-[FAX]ON/[4]/[E])
• Connector check
• Harness check.
Intermediate transport sensor
(S17)
• Sensor check (Perform the input check: 03-[FAX]OFF/[1]/[A])
• Connector check
• Harness check.
Option LCF transport motor • Motor check (Perform the output check: 03-122, stop 03-172)
• Connector check
• Harness check.
Option LCF transport clutch • Clutch check (Perform the output check: 03-273)
• Connector check
• Harness check.
LGC board • Connector check (CN346)
• Board check.
LCF board • Connector check (J854)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
Registration sensor
Intermediate transport sensor
Option LCF transport motor
Option LCF transport clutch
LGC board
LCF board
Check item Measures
To Next Page
Loading...
