Toshiba e-STUDIO556 - Page 611

8
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
8 - 103
[CB30] Tray lift motor abnormality
[CB40] Alignment motor (rear) abnormality
Delivery motor clock sensor
Finisher control board
Classification Error item
Finisher related service call
Check item Measures
Tray1 lifting motor(M5) • Motor check
• Connector check
• Harness check
Tray 1 home position sensor(PI8) • Sensor check
• Connector check
• Harness check
Tray 1 • Move check
Finisher control board • Connector check
• Board check
Replace parts Remarks
Tray1 lifting motor
Tray 1 home position sensor
Finisher control board
Classification Error item
Finisher related service call
Check item Measures
Alignment motor (M3) • Motor check
• Connector check
• Harness check
Alignment guide home position
sensor (PI6)
• Sensor check
• Connector check
• Harness check
Alignment guide • Move check
Finisher control board • Connector check
• Board check
Replace parts Remarks
Alignment motor
Alignment guide home position
sensor
Replace parts Remarks