12
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
BACKUP FUNCTION
12 - 9
[F] Reset user’s setting items and restore data/information
Ask the user (machine administrator) to reset the user’s setting items and to restore data or information.
Refer to the following for the reset and restore:
* When the SSL is enabled, perform the setting of the following items again with “Create self-
certificate” of TopAccess.
Country Name
State or Province Name
Locality Name
Organization Name
Organizational Unit Name
Common Name
Email Address
* When wireless LAN is used, perform the setting again on the LCD panel. (only when security with a
certificate is used) Also, upload the following certificate file with ”Install Certificate for Wireless LAN”
of TopAccess.
CA certificate
User certificate
[G] Reset “FUNCTION LIST FOR MAINTENANCE”
(1) Print out the “FUNCTION LIST FOR MAINTENANCE” list after the formatting.
P.12-7 "[B] Print out “FUNCTION LIST FOR MAINTENANCE”"
(2) While pressing [1] and [3] simultaneously, turn the power ON. (Function Mode)
(3) Compare the lists which were printed before and after the formatting to check the setting items
having the different setting values. Set the value which was set before the formatting
Turn the power OFF.
(4) Turn the power OFF.
Items to reset/restore Method
Printer driver Upload them in the “Administrator” menu of TopAccess.
F-code information, Template registering
information, Address book data
Restore them in the “Administrator” menu of TopAccess.
Department management data Import them in the “Administrator” menu of TopAccess.
Image data in the e-Filing Restore them in the “e-Filing” of the TopAccess.
Role information Import role information on the TopAccess menus.
[User Management] tab > [User Confirm/Create/Modify] > [Role
Information]
To Next Page
Loading...
