Tests and Diagnostics
TECRA A11/S11/P11/Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 3-105
Status Description
Device not connected Peripheral device necessary for the test is not
connected.
USB flash memory, FDD and others may be connected
to the PC.
Device has a problem Failure occurred in the device driver.
This Device is disabled The device has been removed.
This Device is currently stopped The device is in the STOPPED state.
IP Address cannot be acquired The IP address is not able to be obtained.
The LAN cable may not be connected.
No Test Media Test media is not inserted.
Please insert the test media to the ODD or the FDD.
Space Size Error This device is insufficient of free disk spaces required
for a test.
No partition or file A partition is not in devices, such as HDD, USB, and
IEEE1394. Or the file does not exist in HDD.
▼ Test result … The test results to be displayed on the screen are as follows:
▼ PASS … Updates the number of passes of each test in real time during a test and displays
it.
Status Description
-- This is displayed before the start of every test or if the
test is skipped.
OK The test was successful
NG The test failed
▼ ERROR …Updates the number of error occurrences in each test in real time during a test
and displays it.
To Next Page
Loading...
Need help?
General
