Toshiba TECRA A11 Series User Manual

TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 4-85
Installing the MDC/SIM board
To install the MDC/SIM board, follow the steps below and refer to Figure 4-44 and 4-45.
1. Set the RJ11 harness holder to the system board while engaging the latches.
2. Secure the RJ11 harness holder with the following screw.
 M2.04B BIND screw 1
3. Set the RJ11 harness into the RJ11 harness holder and connect the RJ11 harness to
the connector CN3010 on the system board.
4. Connect the RJ11 harness to the connector on the MDC.
5. Set the MDC on the system board.
6. Set the SIM board on the MDC and secure them with the following screws.
 M2.06B BIND screw 2 (with SIM board)
or
 M2.04B BIND screw 2 (without SIM board)
7. Connect the SIM board FFC to the connector CN9570 on the system board and
CN9670 on the SIM board.

Toshiba TECRA A11 Series Specifications

General

RAM	Up to 8GB DDR3
Operating System	Windows 7 Professional
Battery Life	Up to 4 hours
Optical Drive	DVD SuperMulti Drive
LAN	Gigabit Ethernet
Processor	Intel Core i3, i5, or i7
Display	15.6-inch HD (1366x768)
Storage	HDD up to 500GB
Graphics	Intel HD Graphics
Wireless	802.11 a/g/n
Webcam	Integrated webcam
Ports	USB 2.0, VGA, RJ-45
Card Reader	SD
Battery	6-cell Li-ion
Dimensions	374 x 250 mm
Chipset	Mobile Intel QM57 Express Chipset