Toshiba TECRA A11 Series - Page 380

4-90 [CONFIDENTIAL] TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784)
5. Turn up the insulator (LCD HNS INSULATOR).
6. Remove the following screws and stand the LCD unit.
 M2.55C Tapping screw 4
Be careful that the LCD harness is connected to the connector on the back of the
LCD unit.
Figure 4-49 Removing the LCD unit (3)
Insulator (LCD HNS INSULATOR)
LCD harness
M2.5x5C Tapping
M2.5x5C Tapping
M2.5x5C Tapping
LCD unit