Appendix A: Ordering Genuine Ithaca Supplies
100-11672 - Rev D Page 155
2) Click [Print] to print the TK-GAP adjustment pattern.
Examining and Adjusting TK-GAP
1) Observe the TK-GAP Adjustment Pattern and examine if the TK-GAP
adjustment is necessary for Print Modules according to the following. Perform
the adjustment, if necessary.
Find where the paper perforation is located on the TK-GAP adjustment
pattern scale.
If the paper perforation is at the “+2” position on the TK-GAP adjustment
pattern scale, the adjustment value is “+2”.
To Next Page
Loading...
