TransAct Printrex 980 - Random, Bizarre Characters Are Printed; 100-11672 - Rev D; Slow to Print; Print Quality Is Poor

Appendix B: Frequently Asked Questions
Page 284 100-11672 - Rev D
Random, Bizarre Characters Are Printed
Check Point
Solution
An Interface cable is disconnected.
Check a Interface cable and make
sure that it is connected to the printer
and the computer.
The 980 printer driver is not selected
on the computer.
Make sure that the 980 printer is
selected when you start the print job.
Slow To Print
Check Point
Solution
Print speed is set to low speed.
Open the Printing Preferences tab of
the Options and set Print Speed.
Print Quality Is Poor
Check Point
Solution
Streaks appear on the printout.
Open the Utility tab of the printer
driver and perform Cleaning
operation.
White spots due to missing colors.
Open the Utility tab of the printer
driver and perform Cleaning
operation.
Printout is faint.
Open the Utility tab of the printer
driver and perform Cleaning
operation.
Misalignment of colors appears.
Open the Utility tab of the printer
driver and perform Printhead Position
Adjustment operation.