Appendix A: Ordering Genuine Ithaca Supplies
100-11672 - Rev D Page 179
Examining and Adjusting Printhead Position:
1) Observe the TK-GAP Fine Adjustment Pattern and examine if the TK-GAP
adjustment is necessary for Print Modules according to the following. Perform
the adjustment, if necessary.
Find where the paper perforation is located on the TK-GAP Fine
Adjustment Pattern scale. If the paper perforation is at the “+1”
position on the TK-GAP Fine Adjustment pattern scale, the
adjustment value is “+1”.
To Next Page
Loading...
