132 Other settings and functions
Call recording with AutoStart
Standby mode is activated in principle in idle mode. The recording button LED
lights up. You cannot switch off the recorder. As soon as a call is set up, call re-
cording starts automatically.
^ Lift the handset.
or
: Press the key shown.
[ The subscriber answers. You hear a beep, the recording symbol | is shown
on the display and the recording button LED remains lighting. The call is now be-
ing recorded. (see also page 130)
You can pause the recording at any time and continue it again.
] or : If you end the call, the AutoStart process is set up again for the next call.
Controlling call recording
Starting call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has not started. The recording button LED is not lighting.
[ You are conducting a call (see also page 130).
Press the recording button to start the recording - the function key above which
the text label flashes or is shown inverse.
You hear a beep and the recording symbol | is shown on the display. The call
is now being recorded. (see also page 130)
Pausing call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has started. The recording button LED lights up.
[ You are conducting a call (see also page 130).
Press the recording button to pause the recording - the function key above which
the text label stops flashing or is shown normally, and the recording symbol |
on the display disappears.
You can start the recording again at any time, for example to continue recording
the current call.
Ending call recording automatically
Prerequisite: You are conducting a call. Recording has started. The recording
button LED lights up.
] or : The recording is ended automatically as soon as the call is terminated or if the
call status changes so that the call is no longer being recorded - for example if
a line is placed on manual hold and another line is seized. (Multi-line).
The LED extinguishes and the recording symbol | on the display disappears.
Recording
_
Recording
_
To Next Page
Loading...
