Unify OpenScape CP200 - Page 133

Other settings and functions 133
Consultation during call recording
Prerequisite: You are conducting a call. Recording has started. The recording
button LED is lighting.
You initiate a consultation – your main call is placed on hold as a result while the
consultation is being performed.
j The recording is paused while you initiate the consultation. The recording sym-
bol | on the display disappears.
[ If the consultation partner answers, the consultation call is recorded. You hear a
beep and the recording symbol | is shown on the display again.
You can now terminate the consultation call or for example switch back to the
first call party (alternate) while the consultation call is placed on hold.
Second call during call recording
Prerequisite: You are conducting a call. Recording has started. The recording
button LED is lighting.
[ You are conducting a call. You hear a beep and the recording symbol | is
shown on the display. The call is now being recorded.
A second call party camps on  page 46.
In the pop-up menu:
Select and confirm the option shown.
You are connected with the second party. You hear a beep and the recording
symbol | is shown in the line for the second call – this call is now being record-
ed. The first party is placed on hold.
Call recording while alternating
Prerequisite: You have an active or held consultation or second call. Recording
has started. The recording button LED is lighting.
[ You are connected with the second party. You hear a beep and the recording
symbol | is shown in the line for the second call.
Select and confirm the option shown in this connection's context menu.
[ You are switched to the main call. You hear a beep and the recording symbol |
is shown in the line for the main call – this call is now being recorded.
You can pause and restart the recording at any time in manual and autostart
modes.
Accept
Alternate