Making calls in the team 77
• the secondary line
you press the line key.
A number specified by you is dialed immediately with a hot line and after a spe-
cific time with a warm line.
Examples:
• The phone in the elevator immediately dials the reception number.
• The phone at a patient's bed dials the ward number after one minute, for ex-
ample, if no other number is dialed.
Entering a number for the hot and warm line function
Specify which number should be dialed when the hot or warm line function is ac-
tivated.
z You can also configure this setting via the WEB interface page 143.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the line you want.
Select and confirm the option shown.
j Enter and confirm the destination.
Select and confirm the option shown.
Connecting
A subscriber from a line trunk group is on a call. The subscriber's primary line is
configured as a secondary line on your phone. This line now has the status
"busy". You can connect to the call by pressing the illuminated key for this line
(see also page 71).
Prerequisite: A secondary line is set up on your multi-line phone, the option to
connect to the call is activated for your phone and "system conference" is set up
for your system.
If a preview is set up and activated for the relevant line ( page 79), you have
to press the line key a second time following the preview in order to connect.
The key of a secondary line illuminates – it is busy. You want to connect to the
call.
User
Configuration
Keyset
Lines?
Line f
Hot/warm dest.? = nnnn f
Save & exit l
To Next Page
Loading...
