Basic functions 33
Basic functions
Accepting a call
You r OpenStage rings with the tone signal set when an incoming call is received.
The call is also visually signaled on the call display.
• When you receive an internal call, your telephone rings once every four
seconds (single-tone sequence).
• When you receive an external call, your telephone rings twice in rapid
succession every four seconds (dual-tone sequence).
• When you receive a call from the entrance telephone, your telephone rings
three times in rapid succession every four seconds (triple-tone sequence).
• If a call is waiting, you hear a short tone (beep) every six seconds.
If information on the calling party (name, phone number) is transmitted, it will
appear on the graphic display.
Accepting a call via the handset
The phone rings. The caller appears on the screen.
Pay attention to the notes on voice encryption Æ Page 77.
^ Lift the handset.
if nec. + or - Adjust the call volume. Keep pressing the key until the desired volume is set.
Please read the introductory chapter "Getting to know the OpenStage"
Æ Page 14 carefully before performing any of the steps described here on
your phone.
Your administrator can adjust the ring cadence for external and internal
calls for you. In
other words, different ring cadences can be set for
different internal callers.
Any settings you are currently making on the phone will be interrupted by
an incoming call.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
