Unify OpenStage 40 User Manual

74 Programming sensor keys
Changing the label
The label set when a repdial key was programmed can also be subsequently
changed.
Changing the label
S Hold down the key shown.
Confirm the option shown.
or
N Open the Program/Service menu Æ Page 31.
Select and confirm the option shown.
S Press the required key.
if nec.
Select and confirm the option shown.
Select and confirm the option shown.
Confirm the option shown.
j Enter text via the dialpad (max. 12 characters) Æ Page 24.
Select and confirm to reset to the default label.
Confirm to apply the changes.
or
Select and confirm to reject the changes made.
Confirm the option shown.
Deleting sensor key programming
Deleting a function/phone number/label
S Press and hold the required sensor key.
Select and confirm the option shown.
You cannot change the labels on function keys.
Assign telephony function
Prog. feature key
+=Next level
Key label
Change
Default label
Save
Previous
Exit
Adapt the contrast of the key label to your surroundings Æ Page 120.
Clear key

Unify OpenStage 40 Specifications

General

Resolution	240 x 128 pixels
Full duplex	Yes
Camera included	No
Dimensions (WxDxH)	270 x 220 x 70 mm
Networking features	QoS
Supported network protocols	IEEE 802.1Q (VLAN), IEEE 802.1p
Dialer location	Base
Phonebook capacity	- entries
Volume control	Digital
Voice codecs	G.711, G.722
Display number of lines	6 lines
Display number of colors	Monochrome
Product color	Black, Silver
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 40 °C
Certification	CE, EMC EN55022 Cl. B, EN55024, EN61000-4-11, EN61000-3-2, EN60950-1, EMC (FCC) P.15 (CFR 47) Cl. B, UL60950-1/CSA 22.2 No950

Weight and Dimensions

Weight	1068 g