Unify OpenStage 40 User Manual

78 Privacy/security
Turning ringer cutoff on and off
If you do not wish to take calls, you can activate the ringer cutoff function. Calls
are only identified by one ring signal, an indication on the display and a key that
has been programmed to flash (such
as a trunk key).
Activating
c Open the idle menu Æ Page 26.
Select and confirm the option shown
1
.
Deactivating
c Open the idle menu Æ Page 26.
Confirm the option shown.
Activating/deactivating "Do not disturb"
If you do not wish to take calls, you can activate do not disturb. Internal callers
hear the busy tone, external callers are connected to another phone, which you
can specify (consult your administrator).
Activating
c Open the idle menu Æ Page 26.
Select and confirm the option shown.
Activating
c Open the idle menu Æ Page 26.
Confirm the option shown.
Ringer cutoff on
1. ”Differing display views in a HiPath 4000 environment” Æ Seite 128
Ringer cutoff off
Do not disturb on
DND off
When you lift the handset, you will hear a special tone (continuous
buzzing) reminding you that "Do not disturb" is activated.
Authorized internal callers automatically override the DND feature after
five seconds.

Unify OpenStage 40 Specifications

General

Resolution	240 x 128 pixels
Full duplex	Yes
Camera included	No
Dimensions (WxDxH)	270 x 220 x 70 mm
Networking features	QoS
Supported network protocols	IEEE 802.1Q (VLAN), IEEE 802.1p
Dialer location	Base
Phonebook capacity	- entries
Volume control	Digital
Voice codecs	G.711, G.722
Display number of lines	6 lines
Display number of colors	Monochrome
Product color	Black, Silver
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 40 °C
Certification	CE, EMC EN55022 Cl. B, EN55024, EN61000-4-11, EN61000-3-2, EN60950-1, EMC (FCC) P.15 (CFR 47) Cl. B, UL60950-1/CSA 22.2 No950

Weight and Dimensions

Weight	1068 g