Basic functions 37
Dialing with the headset connected
Prerequisite: The headset is connected.
j Internal calls: Enter the phone number.
External calls: Enter the external code and the phone number.
o The headset key lights up.
The connection is set up as soon as your input is complete.
Pay attention to the notes on voice encryption Æ Page 77.
Dialing with repdial keys
Prerequisite: You have saved a number on a repdial key Æ Page 73.
S Press the key with the saved number.
If the number is saved at the second level, press the "Shift" key first.
^ Lift the handset.
or
n Press the key shown.
Pay attention to the notes on voice encryption Æ Page 77.
Redialing a number
The last ten external phone numbers dialed are stored automatically.
You can redial them simply by pressing a key.
Displaying and dialing saved station numbers
, Press the key shown.
Keep selecting and confirming the option shown until the phone number you
want appears.
Select and confirm the option shown.
Pay attention to the notes on voice encryption Æ Page 77.
Make sure your headset port is set up properly Æ Page 124.
You can also press the repdial key during a call and automatically initiate
a callback
Æ Page 39.
If this feature is configured (consult your administrator), account codes
entered are also saved
Æ Page 76.
Next
Call
On a multi-line phone, the last number dialed on the primary line is always
saved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
