Displaying and assigning call charges 75
Displaying and assigning call charges
Displaying call charges (not for U.S.)
For the current call
Call charges are shown by default on the display when a call ends.
If you want to display call charges as they occur during a chargeable call, your
administrator must request this option from the network operator.
Call charge display must be requested from the network operator and configured
by the relevant administrator.
Depending on the setting, call charges are displayed during or after a call.
Depending on the network operator, free external calls are also displayed. The
message "Free of Charge" appears on the screen either before or during the
call.
If the cost indication facility has not been installed, the display will show the
dialed number and/or the duration of the telephone call.
For all calls and for the last call
Connection charges for the last chargeable call made are displayed first. After
five seconds, the accumulated connection charge (total) is displayed.
N Open the Program/Service menu Æ Page 31.
Select and confirm the option shown.
Select and confirm the option shown
1
.
If a call is forwarded, call charges are assigned to the destination of the
call transfer operation.
More features g
Show call charges
1. ”Differing display views in a HiPath 4000 environment” Æ Seite 128
To Next Page
Loading...
Need help?
General
Weight and Dimensions
