Unify OpenStage 40 User Manual

Fixing problems 133
Possible cause 2:
If "Clear LED support" appears in the menu:
you tried to program a station number without LED display or an external station
number on a key that is already programmed with an internal phone number with
LED display.
Possible reactions:
Confirm "Clear LED support" to save the station number. The existing internal
station number remains on the other level without LED display.
Contact partner in case of problems
Consult your administrator if a fault persists for more than five minutes, for
example.

Unify OpenStage 40 Specifications

General

Resolution	240 x 128 pixels
Full duplex	Yes
Camera included	No
Dimensions (WxDxH)	270 x 220 x 70 mm
Networking features	QoS
Supported network protocols	IEEE 802.1Q (VLAN), IEEE 802.1p
Dialer location	Base
Phonebook capacity	- entries
Volume control	Digital
Voice codecs	G.711, G.722
Display number of lines	6 lines
Display number of colors	Monochrome
Product color	Black, Silver
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 40 °C
Certification	CE, EMC EN55022 Cl. B, EN55024, EN61000-4-11, EN61000-3-2, EN60950-1, EMC (FCC) P.15 (CFR 47) Cl. B, UL60950-1/CSA 22.2 No950

Weight and Dimensions

Weight	1068 g