Individual phone configuration 123
Adjusting the speakerphone to the room acoustics
To help the other party understand you clearly while you are talking into the
microphone, you can adjust the telephone to the acoustics in your environment:
„T0343 Quiet room," "T0344 Normal room" and "T0345 Noisy room."
+ or - Press one of the keys shown in idle mode.
Select and confirm the option shown.
+ or - To set the room type: Keep pressing these keys until the setting you want
appears on the screen.
i Save.
Activating/deactivating the ring tone
You can see whether the function is activated or deactivated from the
corresponding icon in the status bar on the display
Æ Page 25.
) Hold down the key shown.
Setting local ring tones
Selecting and configuring the call type
The ring tone mode "Local ringer" is set. Different ring tone types are sent by the
OpenScape Business/HiPath
3000. Not all of the following types will necessarily
be used in your system configuration:
• Internal
• External
• Attention
Select the required call type and adjust to suit your requirements.
z
You can also configure the following setting via the web interface Æ Seite 134.
N Open the menu Æ Page 31.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
For instance, select "Internal" and confirm the option shown.
Select the required ring tone file
[
1
]
or "pattern". You will hear the associated ring
tone melody. Confirm current ring tone file.
Handsfree
User f
Ringer ? f
Local ringers ? f
Internal ? f
ABC.wav f
1. The phone displays the current setting
To Next Page
Loading...
Need help?
General
Weight and Dimensions
