Enhanced phone functions 49
Activating the door opener
N Open the Program/Service menu Æ Page 31.
Select and confirm the option shown.
Select and confirm the option shown.
j Dial the entrance telephone number.
j Enter the five-digit code. Default code = "00000".
or
Select the displayed function and press "OK" to change the code.
Select and confirm the option shown.
or
You can also open the door without a doorbell ring.
Deactivating the door opener
N Open the Program/Service menu Æ Page 31.
Select and confirm the option shown.
Select and confirm the option shown.
Accepting a call from an answering machine
If an answering machine is connected to your system (consult your
administrator) and you have programmed the answering machine's internal
number on a key
Æ Page 69, you can accept the call from the answering
machine.
R The LED lights up. Press the key shown.
Making calls
Control Relay g
Door opener on
3=change password
1=enable with ring
2=enable without ring
Control Relay g
Door opener off
To Next Page
Loading...
