Unify OpenStage 40 User Manual

60 Enhanced phone functions
Preventing and allowing call waiting (automatic
camp-on)
If this function has been configured (consult your administrator), you can prevent
or allow a second call
Æ Page 59 from being signaled by automatic camp-on
during an ongoing call.
N Open the Program/Service menu Æ Page 31.
Select and confirm the option shown
1
.
or
Select and confirm the option shown.
Turning the call waiting tone on and off
You can suppress the call waiting tone (approx. every six seconds) for second
calls. A single special dial tone then alerts you to the waiting call.
Activating the call waiting tone
c Open the idle menu Æ Page 26.
Select and confirm the option shown.
Deactivating the call waiting tone
c Open the idle menu Æ Page 26.
Select and confirm the option shown.
Saving a number
You can save your call partner's station number for subsequent redialing from
the caller list
Æ Page 51.
Prerequisite: You are on a call or an external station is being called.
Confirm the option shown.
Call wait.trm.off
1. ”Differing display views in a HiPath 4000 environment” Æ Seite 128
Call wait.trm.on
Waiting tone on
Waiting tone off
Save number

Unify OpenStage 40 Specifications

General

Resolution	240 x 128 pixels
Full duplex	Yes
Camera included	No
Dimensions (WxDxH)	270 x 220 x 70 mm
Networking features	QoS
Supported network protocols	IEEE 802.1Q (VLAN), IEEE 802.1p
Dialer location	Base
Phonebook capacity	- entries
Volume control	Digital
Voice codecs	G.711, G.722
Display number of lines	6 lines
Display number of colors	Monochrome
Product color	Black, Silver
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 40 °C
Certification	CE, EMC EN55022 Cl. B, EN55024, EN61000-4-11, EN61000-3-2, EN60950-1, EMC (FCC) P.15 (CFR 47) Cl. B, UL60950-1/CSA 22.2 No950

Weight and Dimensions

Weight	1068 g