Individual phone configuration 121
Adjusting displays on the Open Stage Key
Module
You can adjust the contrast setting for any OpenStage Key Module connected to
suit the current light conditions (eight settings available).
+ or - Press one of the keys shown in idle mode Æ Page 25.
Select and confirm the option shown.
+ or - Keep pressing the key until the desired contrast is set.
i Save.
Audio
Setting the ring tone mode
You can use the two ring tone mode options
• HiPath
• Local ringer
to decide how the ring tone is generated on the telephone. With the setting
"HiPath", the system sends the ring tone type and the dependent ring tone,
which you can adjust subsequently
Æ Page 122.
If "Local ringer" is selected, the system sends the ring tone type and you select
which ring tone is required for the respective ring tone type in the "Local ringers"
menu
Æ Page 123.
z
You can also configure the following setting via the web interface Æ Seite 134.
N Open the menu Æ Page 31.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
or
Select and confirm the option shown.
Select and confirm the option shown.
Key label contrast
User ? f
Ringer ? f
Ringer mode ? f
HiPath? f
Local ringer ? f
Options: Save & exit? f
To Next Page
Loading...
Need help?
General
Weight and Dimensions
