Unify OpenStage 40 - En-Bloc Dialing (Local)

Individual phone configuration 125
En-bloc dialing (local)
This function is not supported by HiPath 3000.
If en-bloc dialing is activated, you can delete characters with the backspace key
as you enter a phone number and then enter new characters. The connection is
only established when you confirm "Dial".
z
You can also configure this setting via the web interface Æ Seite 134.
N Open the menu Æ Page 31.
Confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the "En-block dialing" option.
Select and confirm the setting
[
1
]
you want in the context menu ("Activated" or
"Deactivated").
Select and confirm the option shown.
User
Configuration
Outgoing calls
Deactivated g
1. The phone displays the current setting
Save & exit