Enhanced phone functions 61
Parking a call
You can park up to ten internal and/or external calls. Parked calls can be
displayed and picked up on another telephone. This feature is useful,
for
example, if you want to continue a call at another phone.
Prerequisite: You are conducting a call.
N Open the Program/Service menu Æ Page 31.
Select and confirm the option shown.
Select and confirm the option shown.
0 ... 9 Enter the number of the park position (0 - 9) and make a note of it. If the park
position number you entered is not displayed, it is already in use; enter another
one.
Retrieving a parked call
Prerequisite: One or more calls have been parked. The phone is idle.
N Open the Program/Service menu Æ Page 31.
Select and confirm the option shown.
Select and confirm the option shown
1
.
0 ... 9 Enter the park position number you noted earlier.
If the park position number you enter is not in use, you cannot retrieve the call.
Calls g
Park a call
Calls g
Retrieve call
1. ”Differing display views in a HiPath 4000 environment” Æ Seite 128
If a parked call is not picked up, after a specific period of time the call is
returned to the telephone from where it was parked (recall).
To Next Page
Loading...
