Unify OpenStage 40 User Manual

118 Special functions in the LAN
Ringing group
You can have calls for your telephone signaled audibly at external telephones or
at telephones in other HiPath
3000/OpenScape Business or
OpenScape Office MX/LX communication platforms Æ Page 110.
Saving, displaying and deleting telephones for the ringing group
N Open the Program/Service menu Æ Page 31.
Confirm the option shown.
Select and confirm the option shown.
Confirm the option shown.
or
Select and confirm the option shown.
or
Select and confirm, then follow the operating instructions.
j Enter the phone number.
Select and confirm the option shown.
Confirm the option shown.
Select and confirm the option shown.
Removing all telephones in a call ringing group
c Open the idle menu Æ Page 26.
Select and confirm the option shown.
Destinations g
Ringing group on
Add to ringing group
Add another station
Display/remove
Entry complete
Save
Exit
Ringing group off

Unify OpenStage 40 Specifications

General

Resolution	240 x 128 pixels
Full duplex	Yes
Camera included	No
Dimensions (WxDxH)	270 x 220 x 70 mm
Networking features	QoS
Supported network protocols	IEEE 802.1Q (VLAN), IEEE 802.1p
Dialer location	Base
Phonebook capacity	- entries
Volume control	Digital
Voice codecs	G.711, G.722
Display number of lines	6 lines
Display number of colors	Monochrome
Product color	Black, Silver
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	5 - 40 °C
Certification	CE, EMC EN55022 Cl. B, EN55024, EN61000-4-11, EN61000-3-2, EN60950-1, EMC (FCC) P.15 (CFR 47) Cl. B, UL60950-1/CSA 22.2 No950

Weight and Dimensions

Weight	1068 g